Home - 坤溢企業股份有限公司

01 Our Services

Introduction

Since the founding of the People's Republic of China in 1993, our company has been devoted to the improvement and improvement of crane repair and related engineering since it has maintained the concept of technology, service and reliability.

understand more..

product

Provide safety rail, slip ring, cable protection chain, cable take-off, all kinds of cable distribution equipment, switches, etc., the target all stock, shorten the preparation time feedback industry

understand more..

Actual performance

The existence value of the enterprise lies in the satisfaction of the customers. For more than thirty years, the company has also deeply felt the support and care of its customers. This precious feeling is the driving force for all my colleagues to step up their paces and must make every effort

understand more..

02 About Us

Founded 43 years

Since the founding of the People's Republic of China in 1993, our company has been specializing in the repair of cranes and related engineering improvements. We are committed to the production and improvement of components and have won many patents and standardized and localized them.

Professional license

We are affirmed from all over the world, won a number of patents, and standardization, localization, the goal is to stock, shorten the preparation time for the project, back to the industry.

We work hard to improve your productivity

The support and affirmation of the industry is the driving force for the company to continue research and development, let us work together to provide you with the safety and automation related engineering services.

03 SOLUTIONS

W-type safety track: It is known that since the beginning of 1912, Germany started to use the safety track, but also the poor safety of the bare copper wire. It started to research and develop the mass production of 60A ~ 150A continuous rail and won the support and love of the industry . Under the experience, we see that there is no higher amperage rail in the market, and W-type is our high amperage (refer to Deutsche Rail), so quality is the most basic requirement of Globe Star.

Imported iron than the domestic copper conductivity, how to do? How is it possible to open the electrical rules, the physical properties of conductive materials, iron conductivity of 17%, 99% of copper, oxygen-free copper up to 99.9% Does it mean that the moon abroad should be more round, across the sea is equal to gilded, extraordinary value. Actually, we all know that there is no copper mine of mining value in Taiwan. Basically, copper is imported and can be considered as an ocean crossing. Therefore, when smart homeowners make engineering equipment decisions, please do not neglect your rights, price, material, and material , Conductor copper thickness, more than the construction quality, that is, often business reputation. Designated brand KYEC, to ensure quality standards and your rights.

Plastic cable protection chain design specifications, bending movement speed Cable chain has reached horizontal movement of more than 5m per second and 10m per second above the acceleration. This benchmark can be applied to any system of cable chains. The highest speed boot specifically by the mobile device from the weight of the rack and move the number of decisions.

軟質圓形雙層吸盤GF30-GF115

軟質圓形雙層吸盤 GF30-GF115

gf30 115 bellows suction cup round

特點
具有高彈性1.5摺的波紋吸墊和內部支撐。吸墊磨損時可以輕鬆更換。連接頭請分開訂購。

應用

-表面彎曲或不平整的工件
-表面極為敏感的工件
-特別柔和的調校
-在不平坦的工件上自動調節高度

料號

Typ	NBR-S	SI-R	Connection Nipple G1/4-A
FBS-GF 30	1.02.1.0018	1.02.1.0021	1.31.1.0014
FBS-GF 55	1.02.1.0028	1.02.1.0031	1.31.1.0014
FBS-GF 75	1.02.1.0034	1.02.1.0037	1.31.1.0014
FBS-GF 95	1.02.2.0003	1.02.2.0004	Vulcanized
FSB-GF 115	1.02.2.0001	1.02.2.0002	Vulcanized

技術資料

Typ	Holding force (N)	Suction radius min:(mm)	Volume** (l)	Weight (kg)
FBS-GF 30	26	25	0.01	0.008
FBS-GF 55	57	50	0.04	0.020
FBS-GF 75	92	70	0.10	0.045
FBS-GF 95	171	90	0.12	0.090
FBS-GF 115	320	110	0.21	0.150

**Volume with suction pad not engaged and unloaded

尺寸

Typ	D1	D2	DN	HW	H1	H2	HG	G	SW
FBS-GF 30	30	22	5	11	31	38	10	G1/4	19
FBS-GF 55	55	22	5	15	41	48	10	G1/4	19
FBS-GF 75	75	22	5	19	41	48	10	G1/4	19
FBS-GF 95	95	28	8	22	36	44	9	G1/4	19
FBS-GF 115	115	54	8	32	50	58	9	G1/4	19

適合的連接單元

Typ	Suction pad retainer		Holders			Supension bolt
Typ	SAS	SAK	Holding bracket	Bushing	Holding joint	Supension bolt
FBS-GF 30 ... FS-GF 75	SAS-M12x1-1/4	---	HSW-M12x1-1/4	HSB-1/4-1/4	HSG-M12x1-1/4	FS ... -M12x1
FBS-GF 95 ... FS-GF 115	SAS-M16x1.5-1/4	---	HSW-M16x1.5-1/4	HSB-1/4-1/4	HSG-M12x1-1/4	FS ... -M16x1.5

硬質圓形雙層吸盤GF10-GF75

硬質圓形雙層吸盤 GF10-GF75

gf10 75 bellows suction cup round

特點
具有1.5摺的波紋吸墊和內部支撐。吸墊磨損時可以輕鬆更換。連接頭請分開訂購。

應用
-表面彎曲或不平整的工件
-特別柔和的調校
-在不平坦的工件上自動調節高度
-滿足不同要求的各種材料

料號

Typ	NBR-S	SI-T	CR-W	PU-B	FKM-S	NR-BR	Connection Nipple
Typ	NBR-S	SI-T	CR-W	PU-B	FKM-S	NR-BR	M5-A	G1/4-A
FS-GF 10 S	1.02.1.0160	1.02.1.0161	1.02.1.0162	1.02.1.0003	1.02.1.0163	1.02.1.0163	1.31.1.0002	---
FS-GF 15 S	1.02.1.0165	1.02.1.0166	1.02.1.0167	1.02.1.0008	1.02.1.0168	1.02.1.0169	1.31.1.0002	---
FS-GF 20 S	1.02.1.0170	1.02.1.0171	1.02.1.0172	1.02.1.0014	1.02.1.0173	1.02.1.0174	---	1.31.1.0005
FS-GF 30 S	1.02.1.0175	1.02.1.0176	1.02.1.0177	1.02.1.0019	1.02.1.0178	1.02.1.0179	---	1.31.1.0005
FS-GF 40 S	1.02.1.0180	1.02.1.0181	1.02.1.0182	1.02.1.0024	1.02.1.0183	1.02.1.0184	---	1.31.1.0005
FS-GF 50 S	1.02.1.0185	1.02.1.0186	1.02.1.0187	1.02.1.0195	1.02.1.0188	1.02.1.0189	---	1.31.1.0004
FS-GF 75 S	1.02.1.0190	1.02.1.0191	1.02.1.0182	1.02.1.0035	1.02.1.0193	---	---	1.31.1.0006

技術資料

Typ	Holding force (N)	Suction radius min:(mm)	Volume** (l)	Weight (kg)
FBS-GF 10 S	1	10	0.001	0.001
FBS-GF 15 S	6	13	0.001	0.002
FBS-GF 20 S	12	18	0.003	0.005
FBS-GF 30 S	33	28	0.008	0.013
FBS-GF 40 S	55	37	0.014	0.019
FBS-GF 50 S	89	47	0.035	0.031
FBS-GF 75 S	197	70	0.10	0.090

* Specifications at 60 % vacuum w/o safety factor, on smooth, dry surfaces

** Volume with suction pad not engaged and unloaded

尺寸

Typ	D1	D2	DN	HW	H1	H2	HG	G	SW
FBS-GF 10 S	10	15	2.5	4	13.5	17	4.5	M5	8
FBS-GF 15 S	15	15	2.5	4	16	19.5	4.5	M5	8
FBS-GF 20 S	20	20	3	9	22	27	10	G1/4	17
FBS-GF 30 S	30	20	4	13	30.5	35.5	10	G1/4	17
FBS-GF 40 S	40	20	4	12.5	30.5	35.5	10	G1/4	17
FBS-GF 50 S	50	32	4	20	36.5	41.5	10	G1/4	17
FBS-GF 75 S	75	40	4	22	41	48	10	G1/4	17

適合的連接單元

Typ	Suction pad retainer		Holders			Supension bolt
Typ	SAS	SAK	Holding bracket	Bushing	Holding joint	Supension bolt
FBS-GF 10 ... FBS-GF 15	SAS-M8x1-M5	---	HSW-M8x1-M5	HSB-M5-1/4	HSG-M8x1-M5	FS ... -M8x1
FBS-GF 20 ... FBS-GF 75	SAS-M12x1-1/4	SAK-M12x1-1/4	HSW-M12x1-1/4	HSB-1/4-1/4	HSG-M12x1-1/4	FS ... -M12x1

圓形雙層吸盤GF 20 - G 85 Vulkollane

圓形雙層吸盤 GF 20 - GF 85 Vulkollane

gf20 85vu bellows suction cup round

特點
由vulkollane製成，非常堅固且極耐久的的雙層吸盤。具有1.5摺的波紋吸墊。 Vulkollane具有比其他材料高10倍的耐磨性，適用於高形變的應用。吸墊被夾住或磨損時可以輕鬆移除。連接頭請分開訂購。

應用

-曲面工件
-耐用且磨損最小，尤其是在多段製造過程中
-油性工件上，帶油槽的“ÖN”設計具有更高的橫向加速度在

料號

Typ	VU-BR	Connectioo Nipple G1/4-A
FBS-GF 20 VU	1.02.1.0100	1.31.1.0021
FBS-GF 30 VU	1.02.1.0101	1.31.1.0021
FBS-GF 40 VU	1.02.1.0102	1.31.1.0020
FBS-GF 40 VU-ON	1.02.1.0103	1.31.1.0020
FBS-GF 50 VU	1.02.1.0104	1.31.1.0022
FBS-GF 60 VU	1.02.1.0105	1.31.1.0022
FBS-GF 60 VU-ON	1.02.1.0106	1.31.1.0022
FBS-GF 85 VU	1.02.1.0107	1.31.1.0022
FBS-GF 85 VU-ON	1.02.1.0108	1.31.1.0022

技術資料

Typ	Holding force (N)	Suction radius min:(mm)	Volume** (l)	Weight (kg)
FBS-GF 20 VU	25	15	0.003	0.008
FBS-GF 30 VU	39	25	0.007	0.015
FBS-GF 40 VU	73	30	0.013	0.021
FBS-GF 40 VU-ON	75	30	0.015	0.020
FBS-GF 50 VU	106	40	0.028	0.028
FBS-GF 60 VU	160	50	0.034	0.039
FBS-GF 60 VU-ON	170	50	0.038	0.035
FBS-GF 85 VU	220	70	0.092	0.098
FBS-GF 85 VU-ON	220	70	0.092	0.098

* Specifications at 60 % vacuum w/o safety factor, on smooth, dry surfaces

** Volume with suction pad not engaged and unloaded

FBS GF 20 VU ... FBS GF 85 VU ON drawing

尺寸

Typ	D1	D2	DN	HW	H1	H2	HG	G	SW
FBS-GF 20 VU	20	15	6	13	18	18	12	G1/4	19
FBS-GF 30 VU	30	15	6	13	22	22	12	G1/4	19
FBS-GF 40 VU	40	21	6	17	30	35	12	G1/4	19
FBS-GF 40 VU-ON	40	21	6	17	30	35	12	G1/4	19
FBS-GF 50 VU	51	23	6	24	41	49	10	G1/4	17
FBS-GF 60 VU	60	27	6	28	40	45	10	G1/4	19
FBS-GF 60 VU-ON	60	27	6	16	40	45	10	G1/4	19
FBS-GF 85 VU	85	30	6	26	57	62	10	G1/4	19
FBS-GF 85 VU-ON	85	30	6	26	57	62	10	G1/4	19

適合的連接單元

Typ	Suction pad retainer		Holders			Supension bolt
Typ	SAS	SAK	Holding bracket	Bushing	Holding joint	Supension bolt
FBS-GF 20VU ... FBS-GF 30VU	SAS-M8x1-1/4	---	HSW-M8x1-1/4	HSB-1/4-1/4	HSG-M8x1-1/4	FS ... -M8x1
FBS-GF 40VU ... FBS-GF 60VU	SAS-M12x1-1/4	---	HSW-M12x1-1/4	HSB-1/4-1/4	HSG-M12x1-1/4	FS ... -M12x1
FBS-GF 80VU	SAS-M12x1-1/4	---	HSW-M16x1.5-1/4	HSB-1/4-1/4	HSG-M16x1.5-1/4	FS ... -M16x1.5

圓形雙層吸盤GF100-GF350

圓形雙層吸盤 GF100-GF350

gf120 350 bellows suction cup round

特點
非常堅固且極耐久的的雙層吸盤。具有1.5摺的波紋吸墊，鋁製主體及硫化橡膠的密封圈。真空吸管連接處位於中央，從直徑200毫米開始真空吸管連接處位於側邊。以平頭螺絲進行連接，可以快速更換密封圈。請單獨訂購連接螺絲。

應用
-表面彎曲，不平整的工件
-特別柔和的調校
-調整不平整工件的高度

料號

Typ	NBR-G	SI-T	Connection Screw
Typ	NBR-G	SI-T	Typ	Art.-Nr:
GF 100	1.12.1.0057	1.12.1.0058	ASB-M16-20	1.31.2.0084
GF 120	1.12.1.0005	1.12.1.0006	ASB-M16-20	1.31.2.0084
GF 150	1.12.1.0008	1.12.1.0009	ASB-M16-20	1.31.2.0084
GF 200	1.12.1.0011	1.12.1.0013	AS-M16-22	1.31.2.0035
GF 250	1.12.1.0015	1.12.1.0017	AS-M16-22	1.31.2.0035
GF 300	1.12.1.0019	1.12.1.0020	AS-M16-22	1.31.2.0035
GF 350	1.12.1.0022	1.12.1.0023	AS-M16-22	1.31.2.0035

技術資料

Typ	Holding force (N)	Suction radius min:(mm)	Volume** (l)	Weight (kg)
GF 100	220	180	0.15	0.12
GF 120	350	220	0.29	0.21
GF 150	500	280	0.48	0.40
GF 200	900	380	0.88	0.99
GF 250	1630	480	1.40	1.85
GF 300	2390	580	3.15	2.95
GF 350	3230	680	4.20	4.40

* Specifications at 60 % vacuum w/o safety factor, on smooth, dry surfaces

** Volume with suction pad not engaged and unloaded

GF 100 ... GF 350 drawing

尺寸

Typ	D1	D2	DN	HW	H1	HG1	G1	G2
GF 100	100	60	8	25	38	13	16.2	---
GF 120	120	82	8	35	55	13	16.2	---
GF 150	150	102	8	41	65	13	16.2	---
GF 200	200	128	8	38	55	13	16.2	G1/2
GF 250	250	178	8	42	59	13	16.2	G3/4
GF 300	300	200	8	58	78	13	16.2	G3/4
GF 350	350	248	8	57	82	13	16.2	G3/4

適合的連接單元

Typ	Suction pad retainer		Supension bolt
Typ	SAS	SAK	Supension bolt
GF 100 ... GF 150	SAS-M16x1.5-M16	SAK-M16x1.5-M16	FS ... -M16x1.5
FS-GR 95 -FS-GR 115	SAS-M20x1.5-M16	SAK-M20x1.5-M16	FS ... -M20x1.5

硬質圓形雙層吸盤GFD 5 - GFD 90

硬質圓形雙層吸盤 GFD 5 - GFD 90

gfd5 90 bellows suction cup round

特點
具有高彈性及堅固的2.5摺波紋吸墊和內部支撐。吸墊磨損時可以輕鬆更換。連接頭請分開訂購。

應用
-表面彎曲，不平整的工件
-特別柔和的調校
-在不平坦的工件上自動調節高度
-滿足各種要求的各種材料

料號

Typ	NBR-S	SI-T	CR-W	PU-B	VI-S	NR-BR	Connection nipple
Typ	NBR-S	SI-T	CR-W	PU-B	VI-S	NR-BR	M5-A	G1/4-A
FBS-GFD 5	1.02.1.0116	1.02.1.0118	1.02.1.0120	1.02.1.0121	---	1.02.1.0122	1.31.1.0002	---
FBS-GFD 7	1.02.1.0123	1.02.1.0125	1.02.1.0127	1.02.1.0128	---	1.02.1.0133	1.31.1.0002	---
FBS-GFD 10	1.02.1.0038	1.02.1.0040	1.02.1.0132	1.02.1.0039	---	1.02.1.0133	1.31.1.0003	---
FBS-GFD 15	1.02.1.0041	1.02.1.0043	1.02.1.0136	1.02.1.0042	---	1.02.1.0137	1.31.1.0003	---
FBS-GFD 18	1.02.1.0138	1.02.1.0140	1.02.1.0142	1.02.1.0143	1.02.1.0144	1.02.1.0145	1.31.1.0003	---
FBS-GFD 20	1.02.1.0044	1.02.1.0046	1.02.1.0148	1.02.1.0045	1.02.1.0149	1.02.1.0150	1.31.1.0003	---
FBS-GFD 30	1.02.1.0047	1.02.1.0049	1.02.1.0153	1.02.1.0048	1.02.1.0154	1.02.1.0155	---	1.31.1.0005
FBS-GFD 40	1.02.1.0050	1.02.1.0052	1.02.1.0158	1.02.1.0051	---	1.02.1.0159	---	1.31.1.0005
FBS-GFD 60	1.02.1.0056	1.02.1.0058	---	1.02.1.0057	---	---	---	1.31.1.0005
FBS-GFD 90	1.02.1.0059	1.02.1.0061	---	---	---	---	---	1.31.1.0008

技術資料

Typ	Holding force (N)	Suction radius min:(mm)	Volume** (l)	Weight (kg)
FBS-GFD 5	0.2	---	0.003	0.001
FBS-GFD 7	0.2	---	0.003	0.001
FBS-GFD 10	1.0	10	0.004	0.001
FBS-GFD 15	1.3	15	0.004	0.001
FBS-GFD 18	6.0	18	0.005	0.001
FBS-GFD 20	13	20	0.005	0.003
FBS-GFD 30	30	28	0.034	0.010
FBS-GFD 40	51	38	0.040	0.029
FBS-GFD 60	96	55	0.080	0.055
FBS-GFD 90	246	85	0.198	0.140

* Specifications at 60 % vacuum w/o safety factor, on smooth, dry surfaces

** Volume with suction pad not engaged and unloaded

FBS GFD 5 ... FBS GFD 90 drawing

尺寸

Typ	D1	D2	DN	HW	H1	H2	HG	G	SW
FBS-GFD 5	5	6	2.5	3	10	13.5	4.5	M5	8
FBS-GFD 7	7	6	2.5	3	10	13.5	4.5	M5	8
FBS-GFD 10	9	9	3.5	3	15	17.5	4.5	M5	8
FBS-GFD 15	14	10	3.5	7	23	25.5	4.5	M5	8
FBS-GFD 18	18	10	3.5	8	23	25.5	4.5	M5	8
FBS-GFD 20	20	10	3.5	9	23	25.5	4.5	M5	8
FBS-GFD 30	32	18	3.5	14	37.5	42.5	10	G1/4	17
FBS-GFD 40	42	20	3.5	17	46	51	10	G1/4	17
FBS-GFD 60	62	22	3.5	23	55	60	10	G1/4	17
FBD-GFD 90	88	25	3.5	27	87.5	92.5	10	G1/4	17

適合的連接單元

Typ	Suction pad retainer		Holders			Supension bolt
Typ	SAS	SAK	Holding bracket	Bushing	Holding joint	Supension bolt
FBS-GFD 5 ... FBS-GFD 30	SAS-M8x1-M5	---	HSW-M8x1-M5	HSB-M5-1/4	HSG-M8x1-M5	FS ... -M8x1
FBS-GFD 40 .. FBS-GFD 60	SAS-M12x1-1/4	---	HSW-M12x1-1/4	HSB-1/4-1/4	HSG-M12x1-1/4	FS ... -M12x1
FBS-GFD 90	SAS-M16x1.5-1/4	---	HSW-M16x1.5-1/4	HSB-1/4-1/4	HSG-M16x1.5-1/4	FS ... -M16x1.5

圓形雙層吸盤GFD 20 -GFD 85 Vulkollan

圓形雙層吸盤 GDF 20 - GDF 85 Vulkollan

gfd20 85 bellows suction cup

特點
由vulkollane製成，具有2.5摺的波紋管，非常堅固且極耐久的的雙層吸盤。 Vulkollane具有比其他材料高10倍的耐磨性，適用於高形變的應用。吸墊被夾住或磨損時可以輕鬆移除。連接頭請分開訂購。

應用
-曲面工件
-具有最小磨損的重型特別是在多段製過程中
-帶油槽的“ÖN”設計，應用在油性工件上具有更高的橫向加速度

料號

Typ	VU-BR	Connectioo Nipple G1/4-A
FBS-GFD 20 VU	1.02.1.0110	1.31.1.0021
FBS-GFD 30 VU	1.02.1.0111	1.31.1.0021
FBS-GFD 50 VU	1.02.1.0112	1.31.1.0020
FBS-GFD 60 VU	1.02.1.0113	1.31.1.0020
FBS-GFD 60 VU	1.02.1.0113	1.31.1.0020
FBS-GFD 85 VU	1.02.1.0114	1.31.1.0022
FBS-GF 85 VU-ON	1.02.1.0115	1.31.1.0022

技術資料

Typ	Holding force (N)	Suction radius min:(mm)	Volume** (l)	Weight (kg)
FBS-GFD 20 VU	24	20	0.004	0.019
FBS-GFD 30 VU	38	30	0.011	0.024
FBS-GFD 50 VU	95	45	0.048	0.031
FBS-GFD 60 VU	150	55	0.063	0.042
FBS-GFD 85 VU	280	80	0.170	0.112
FBS-GFD 85 VU-ON	290	80	0.170	0.112

* Specifications at 60 % vacuum w/o safety factor, on smooth, dry surfaces

** Volume with suction pad not engaged and unloaded

FBS GFD 20 VU ... FBS GFD 85 VU ON drawing

尺寸

Typ	D1	D2	DN	HW	H1	H2	HG	G	SW
FBS-GFD 20 VU	20	12	6	16	25	38	12	G1/4	19
FBS-GFD 30 VU	30	12	6	16	32	38	12	G1/4	19
FBS-GFD 50 VU	51	15	6	20	45	51	12	G1/4	19
FBS-GFD 60 VU	60	21	6	31	75	104	10	G1/4	19
FBS-GFD 85 VU	85	21	6	41	98	92	10	G1/4	19
FBS-GFD 85 VU-ON	85	21	6	41	86	92	10	G1/4	19

適合的連接單元

Typ	Suction pad retainer		Holders			Supension bolt
Typ	SAS	SAK	Holding bracket	Bushing	Holding joint	Supension bolt
FBS-GFD 20 VU... FS-GFD 30 VU	SAS-M8x1-1/4	---	HSW-M8x1-1/4	HSB-1/4-1/4	HSG-M8x1-1/4	FS ... -M8x1
FBS-GFD 50 VU .. FS-GFD 60 VU	SAS-M12x1-1/4	---	HSW-M12x1-1/4	HSB-1/4-1/4	HSG-M12x1-1/4	FS ... -M12x1.5
FBS-GFD VU	SAS*M16x1.5-1/4	---	HSW-M161.5-1/4	HSB-1/4-1/4	HSG-M16x1.5-1/4	FS ... -M16x1.5

橢圓平面吸盤FSL 20x60-FSL 80x370

橢圓平面吸盤 FSL 20x60-FSL 80x370

fsl20x60 80x370 flat suction cup oval

特點

具有堅固耐用且通用的鋁製扁平吸盤本體和硫化橡膠密封圈。使用平頭螺絲起子連接就可以輕鬆更換密封件。請單獨訂購連接螺絲。

應用

-吸取區域較窄的工件（門元件，棒，條，型材）
-工件表面光滑，或略粗糙

料號

Typ	NBR-S	SI-T	Connection Screw
Typ	NBR-S	SI-T	M5-A	Art.-Nr:
DP-FSL 20x60	1.11.1.0398	1.11.1.0399	ASB-M5-20	1.31.2.0009
DP-FSL 30x80	1.11.1.0401	1.11.1.0402	ASB-M8-16	1.31.2.0068
DP-FSL 30x100	1.11.1.0404	1.11.1.0405	ASB-M8-16	1.31.2.0068
DP-FSL 35x200	1.11.1.0407	1.11.1.0408	ASB-M5	1.31.2.0108
DP-FSL 40x110	1.11.1.0410	1.11.1.0411	ASB-M8-16	1.31.2.0068
DP-FSL 55x85	1.11.1.0413	1.11.1.0414	ASB-M12-17	1.31.2.0003
DP-FSL 55x100	1.11.1.0416	1.11.1.0417	ASB-M12-17	1.31.2.0003
DP-FSL 55x125	1.11.1.0419	1.11.1.0420	ASB-M12-17	1.31.2.0003
DP-FSL 55x150	1.11.1.0422	1.11.1.0423	AS-M8-16	1.31.2.0068
DP-FSL 55x200	1.11.1.0172	1.11.1.0426	AS-M8-16	1.31.2.0068
DP-FSL 55x250	1.11.1.0428	1.11.1.0429	AS-M8-16	1.31.2.0068
DP-FSL 55x300	1.11.1.0431	1.11.1.0432	AS-M8-16	1.31.2.0068
DP-FSL 80x250	1.11.1.0434	1.11.1.0435	AS-M16-22	1.31.2.0035
DP-FSL 80x370	1.11.1.0437	1.11.1.0438	AS-M16-22	1.31.2.0035

技術資料

Typ	Holding force (N)	Suction radius min:(mm)	Volume** (l)	Weight (kg)
DP-FSL 20x60	50	18	0.004	0.018
DP-FSL 30x80	90	20	0.010	0.025
DP-FSL 30x100	110	25	0.015	0.030
DP-FSL 35x200	210	25	0.055	0.030
DP-FSL 40x110	140	30	0.035	0.045
DP-FSL 55x85	150	60	0.035	0.060
DP-FSL 55x100	175	60	0.040	0.080
DP-FSL 55x125	220	60	0.050	0.120
DP-FSL 55x150	270	60	0.060	0.150
DP-FSL 55x200	350	60	0.090	0.180
DP-FSL 55x250	440	60	0.100	0.210
DP-FSL 55x300	525	60	0.110	0.260
DP-FSL 80x250	670	80	0.190	0.370
DP-FSL 80x370	1280	80	0.260	0.620

**Volume with suction pad not engaged and unloaded

尺寸

Typ	L1	L2	L3	B1	B2	HW	H1	G1	HG1	G2
DP-FSL 20x60	60	50	---	20	12	4	13	5.2	15	---
DP-FSL 30x80	80	65	---	30	15	5	14	8.2	11	---
DP-FSL 30x100	100	85	---	30	15	5	15	8.2	11	---
DP-FSL 35x200	195	174	---	35	15	9	19	5.2	15	---
DP-FSL 40x110	110	85	---	40	15	10	20	8.2	11	---
DP-FSL 55x85	85	62	---	55	32	8	21	12.2	8	---
DP-FSL 55x100	100	70	---	55	32	9	21	12.2	8	---
DP-FSL 55x125	125	100	---	55	32	9	21	12.2	8	---
DP-FSL 55x150	150	125	50	55	32	9	21	G1/4	10	8.2
DP-FSL 55x200	200	160	75	55	32	9	21	G1/4	10	8.2
DP-FSL 55x250	250	220	90	55	32	8	21	G1/4	10	8.2
DP-FSL 55x300	300	277	110	55	32	8	21	G1/4	10	8.2
DP-FSL 80x250	250	222	90	80	52	10	26	G3/8	10	16.2
DP-FSL 80x370	370	347	140	80	52	10	26	G3/8	10	16.2

適合的連接單元

Typ	Suction pad retainer		Holders			Supension bolt
Typ	SAS	SAK	Holding bracket	Bushing	Holding joint	Supension bolt
FSL 20x60 ... 55x125	SAS-M12x1-M5	---	HSW-M12x1-M5	HSB-M12x1-M5	HSG-1/8x-M5	FS ... -M12x1
FSL 35x200	SAS-M12x1-M5	---	---	---	---	FS ... -M12x1
FSL 55x150 ... FSL 55x200	SAS-M12x1-M12	---	---	---	---	FS ... M12x1
FSL 55x250 ... FSL 80x370	SAS-M16x1.5-M16	---	---	---	---	FS ... M16x1.5

橢圓平面吸盤 FSL 100x200 - 350x60

橢圓平面吸盤FSL 100x200 - 350x600

FEZER FSL flat suction cup oval

特點

具有堅固耐用且通用的鋁製扁平吸盤本體和硫化橡膠密封圈。使用平頭螺絲起子連接就可以輕鬆更換密封件。請單獨訂購連接螺絲。

應用

-重而窄的工件

-工件表面光滑，略粗糙

-重度使用(高頻率使用)

料號

Typ	NBR-S	SI-T	Connection Screw
Typ	NBR-S	SI-T	Typ	Art.-Nr:
DP-FSL 100x200	1.11.1.0157	1.11.1.0159	AS-M12-17	1.31.2.0010
DP-FSL 100x300	1.11.1.0161	1.11.1.0162	AS-M12-17	1.31.2.0010
DP-FSL 120x300	1.11.1.0440	1.11.1.0441	AS-M12-17	1.31.2.0010
DP-FSL 130x450	1.11.1.0443	1.11.1.0444	AS-M16-22	1.31.2.0035
DP-FSL 160x450	1.11.1.0449	1.11.1.0450	AS-M16-22	1.31.2.0035
DP-FSL 180x430	1.11.1.0452	1.11.1.0453	AS-M16-22	1.31.2.0035
DP-FSL 180x500	1.11.1.0455	1.11.1.0456	AS-M16-22	1.31.2.0035
DP-FSL 180x580	1.11.1.0458	1.11.1.0459	AS-M16-22	1.31.2.0035
DP-FSL 200x750	1.11.1.0461	1.11.1.0462	AS-M16-22	1.31.2.0035
DP-FSL 350x600	1.11.1.0464	1.11.1.0465	AS-M24x1.5-28	1.31.2.0069

技術資料

Typ	Holding force (N)	Volume** (l)	Weight (kg)
DP-FSL 100x200	750	0.17	1.25
DP-FSL 100x300	1250	0.28	1.60
DP-FSL 120x300	1450	0.32	1.80
DP-FSL 130x450	2450	0.40	2.80
DP-FSL 160x450	3000	0.60	3.60
DP-FSL 180x430	3225	1.20	3.80
DP-FSL 180x500	3750	1.40	4.10
DP-FSL 180x580	4350	1.65	4.90
DP-FSL 200x750	6250	4.20	6.30
DP-FSL 350x600	7650	6.30	10.8

**Volume with suction pad not engaged and unloaded

尺寸

Typ	L1	L2	L3	B1	B2	HW	H1	G1	HG1	G2	HG2
DP-FSL 100x200	200	160	50	100	65	7	23	G1/4	---	12.2	10
DP-FSL 100x300	300	260	100	100	65	7	23	G1/4	---	12.2	10
DP-FSL 120x300	300	245	100	120	70	6	24	G1/4	---	12.2	10
DP-FSL 130x450	450	415	150	130	100		23	G1/4	---	16.2	12
DP-FSL 160x450	450	413	150	160	120	9	26	G1/2	---	16.2	12
DP-FSL 180x430	430	395	150	180	150	6	20	G1/2	---	16.2	12
DP-FSL 180x500	500	433	150	180	120	20	42	G1/2	---	16.2	12
DP-FSL 180x580	580	544	200	180	150	10	26	G3/4	---	16.2	12
DP-FSL 200x750	750	663	200	200	120	29	54	G3/4	---	16.2	12
DP-FSL 350x600	600	460	200	350	210	30	55	G1	--	25	---

適合的連接單元

Typ	Suction pad retainer		Supension bolt
Typ	SAS	SAK	Supension bolt
FSL 100x200 ... FSL 120x300	SAS-M16x1.5-M12	SAS-M16x1.5-M12	FS ... -M16x1.5*
FSL 130x450 ... FSL 200x750	SAS-M20x1.5-M16	SAK-M20x1.5-M16	FS ... -M20x1.5*
FSL 350x600	SAS-M30x1.5-M20	SAK-M30x1.5-M20	FS ... -M20x1.5*

橢圓平面吸盤 FSL 450x850

橢圓平面吸盤FSL 450x850

fsl150x450 450x850 flat suction cup oval

特點

堅固耐用的扁平吸盤。吸盤有兩種設計。具有用於重型負載的鋼製主體或用於處理多孔材料的鋁製主體。可以內本體的螺芽座連接。以特定的本體螺芽作為真空進氣口。

應用

- 非常重且難移動的工件

-工件表面光滑，略粗糙

-處理重量重的多孔材料

料號

Typ	NBR-S	NBR-G	SI-R	VI-S
DP-FSL 450x850-ST	1.11.1.0119	---	1.11.1.0120	1.11.1.0225
DP-FSL 450x850-AL	---	1.11.1.0117	---	---

技術資料

Typ	Holding force (N)	Volume** (l)	Weight (kg)
DP-FSL 450x850-ST	18750	8.20	12.8
DP-FSL 450x850-AL	18750	8.20	28.6

**Volume with suction pad not engaged and unloaded

尺寸

Typ	L1	L2	L3	L4	L5	B1	B2	B3	B4	B5	H1	H2	HW	G1	G2	G3
DP-FSL 450x850-ST	850	770	400	340	60	450	370	140	---	---	49	12	20	G1	M20	M12x1.75
DP-FSL 450x850-AL	850	770	600	50	180	450	370	100	50	100	49	12	20	G11/4	M10x1.5	M10x1.5