Sample Sidebar Module

This is a sample module published to the sidebar_top position, using the -sidebar module class suffix. There is also a sidebar_bottom position below the menu.

Sample Sidebar Module

This is a sample module published to the sidebar_bottom position, using the -sidebar module class suffix. There is also a sidebar_top position below the search.
Cable reel
taiwan.kyec@msa.hinet.net    星期一~星期五 08:20~17:20

Spring Cable Reel

CR-P12-2

Part 1 Spring Cable Reel

Definition of our type                                                                                       

                                                                                                        KCRS1、KCRS11cable-reel-eng-p1-1    

l   Sheave Guide Chart                                                                                       l   Bracket Chart

CR-P1-3CR-P1-4

 

Specification and Dimension

cable-reel-eng-p1-3

KCRS2WKCRS3W                             KCRS4F、KCRS4W、KCRS5F、KCRS5T、KCRS6T

 

cable-reel-eng-p2-1

How to choose your type
1. Cable's diameter should be smaller than flange's.
2. Cable weight (per meter) X Length < Maximum reel torque
   Example:3.5mm/4C as Cable Dim shows 0.41 kg/m, 10m x 0.41kg/m = 4.1 kg<(7kg)
   Cross-refer the specification (P.5) find the choice is CRS 216W.

cable-reel-eng-p2-2

Reel mounted on the moving equipment will be an effort-saving way.

 

Design(Cross-refer Questionnaire) 

Definition

 

cable-reel-eng-p3-1

 

Example

cable-reel-eng-p3-2

 

Efficient Winding Force(kgf)   

            cable-reel-eng-p3-3   

Max Winding Force    cable-reel-eng-p3-4
Max Efficient Winding Force     Fe(kgf)=μ.F(kgf)     μ=0.7                                                                                    

When quantity of poles is over 4 or speed is over 40 m/min or other resistant cause occur, by all means add the buffer (reduce the μ Efficient Value)

 

Cable Dim

cable-reel-eng-p3-5

 

Spring cable reel installation

Step

1. Power-in terminal enter "D" slip ring until through "G" hollow axis, connected with "E" slip ring. (chart 1)

 cable-reel-eng-p4-1

A : 〇Cable Hole

B : Cable Fixed Flake

C : Cable End

D : Slip Ring Unit

E : Slip Ring

F : Carbon Brush Base

G : Axis Located Screw

H : Axis Located Screw

2. Cable pierces "A" hole 〇 from the inside of the roll plate and through "B" fixed point into "C" cable end. Connect the cable with carbon brush and

    arrange the cables. Lock the outside cap after connection. *To avoid cable hooking the screw parts, cables in the spring ring unit should be leaned

    aside as possible as you can. 

3. Roll all cables clockwise in the roll plate (chart 3), or handle the cable and move roll plate anti-clockwise till all cables completed. (chart 4)

4. Locate the cable reel.

cable-reel-eng-p4-2


5. Move the plate 2~3 cycles (snail shape spring will save the kinetic energy). Pull cable out through the sheave guide; make a trial run after connect

    power.

cable-reel-eng-p4-3

6. When the spring loses its elasticity, repeat the step 5.

7.

                 Moving cart roll horizontally                                             Moving cart on ground    

                                                                                                         

cable-reel-eng-p4-4 cable-reel-eng-p4-5

                        with sheave guide                                     (not recommended due to the addtional kinetic friction)
               (Recommended standard way)

 

Performance

                                                               -Spring Cable Reel-

CR-P5-1 CR-P5-2

For Glass Factory Vacuum Suction Cups                      For multi-function hoist equipment in precast Cement Factory

CR-P5-3 CR-P5-4

Avoid fixingthe electric door, only I-beam needed to suit        For Steel Factory: Moving Cart

CR-P5-5 CR-P5-6

For Gate Door Opening                                                For Civil Engineering 

Login

Register

You need to enable user registration from User Manager/Options in the backend of Joomla before this module will activate.
DMC Firewall is developed by Dean Marshall Consultancy Ltd